MIXING & EFFECTS

Fruity Stereo Enhancer

Fruity Stereo Enhancer contains various filters and processors to alter and enrich the stereo image of the input sound.

Parameters

• Stereo Separation knob (STEREO SEP) - Adjusts the stereo separation of the input signal (does not apply to mono input). Range: 0% (max right) to 200% (max left). At 0% the signal is mono; at 100% the stereo image remains unaltered.
• Pre/Post switch - Lets you choose whether to have the phase offset effect applied before (PRE) or after (POST) the other filters in that plugin.
• Phase Offset knob - Changes the phase of the L or R channels. Top dead centre is normal phase, turning the knob right will progressively offset the phase of the right channel, while turning the knob to the left will progressively offset the phase of the left channel. The phase offset is achieved by delaying the affected channel by up to 500 ms.
• Invert switch - With this filter you can invert the phase in one of the audio channels. NONE disables the effect, LEFT inverts the left audio channel, RIGHT inverts the right audio channel.
• Panning knob (PAN) - Sets the panning of the output. When used with small delays, the phase offset effect can make the sound appear panned to left or right. You can use this knob to compensate for this effect.
• Volume knob (VOL) - Sets the volume of the output. In some cases the stereo separation filter may decrease on increase the volume of the output. You can use this knob to compensate for this effect.

Plugin Credits: Didier Dambrin